Wood shingles and shakes are made from cedar, redwood, southern pine and other woods; their natural look is popular in California, the Northwest and parts of the Midwest. Wood shingles are machinesawn; shakes are handmade and rougher looking. A point to consider: Some local building codes limit the use of wood shingles and shakes because of concerns about fire resistance. Many wood shingles and shakes only have Class C fire ratings or no ratings at all. However, Class A fire ratings are available for certain wood shingle products that incorporate a factory-applied, fire-resistant treatment.
Tile—clay or concrete—is a durable roofing material. Mission and Spanish-style round-topped tiles are used widely in the Southwest and Florida, and flat styles also are available to create French and English looks. Tile is available in a variety of colors and finishes. Tile is heavy. If you are replacing another type of roof system with tile, you will need to verify that the structure can support the load.
Slate is quarried in the United States in Vermont, New York, Pennsylvania and Virginia. It is available in different colors and grades, depending on its origin. Considered virtually indestructible, it is, however, more expensive than other roofing materials. In addition, its application requires special skill and experience. Many old homes, especially in the Northeast, still are protected by this long-lasting roofing material.
Metal, primarily thought of as a low-slope roofing material, has been found to be a roofing alternative for home and building owners with steep-slope roofs. There are two types of metal roofing products: panels and shingles. Numerous metal panel shapes and configurations exist. Metal shingles typically are intended to simulate traditional roof coverings, such as wood shakes, shingles and tile. Apart from metal roofing's longevity, metal shingles are relatively lightweight, have a greater resistance to adverse weather and can be aesthetically pleasing. Some have Class A fire ratings.
Synthetic roofing products simulate various traditional roof coverings, such as slate and wood shingles and shakes. However, they do not necessarily have the same properties.
Before making a buying decision, NRCA recommends that you look at full-size samples of a proposed product, as well as manufacturers' brochures. It also is a good idea to visit a building that is roofed with a particular product.
VENTILATION AND INSULATION ARE KEY
One of the most critical factors in roof system durability is proper ventilation. Without it, heat and moisture build up in an attic area and combine to cause rafters and sheathing to rot, shingles to buckle, and insulation to lose its effectiveness.
Therefore, it is important never to block off sources of roof ventilation, such as louvers, ridge vents or soffit vents, even in winter. Proper attic ventilation will help prevent structural damage caused by moisture, increase roofing material life, reduce energy consumption and enhance the comfort level of the rooms below the attic.
In addition to the free flow of air, insulation plays a key role in proper attic ventilation. An ideal attic has:
The requirements for proper attic ventilation may vary greatly, depending on the part of the United States in which a home or building is located, as well as the structure's conditions, such as exposure to the sun, shade and atmospheric humidity. Nevertheless, the general ventilation formula is based on the length and width of the attic. NRCA recommends a minimum of 1 square foot of free vent area for each 150 square feet of attic floor—with vents placed proportionately at the eaves (e.g., soffits) and at or near the ridge.
- A gap-free layer of insulation on the attic floor to protect the house below from heat gain or loss.
- A vapor retarder under the insulation and next to the ceiling to stop moisture from rising into the attic.
- Enough open, vented spaces to allow air to pass in and out freely.
- A minimum of 1 inch between the insulation and roof sheathing.
EVEN ROOFS HAVE ENEMIES
A roof system's performance is affected by numerous factors. Knowing about the following will help you make informed roof system buying decisions:
CHOOSING A CONTRACTOR
- Sun: Heat and ultraviolet rays cause roofing materials to deteriorate over time. Deterioration can occur faster on the sides facing west or south.
- Rain: When water gets underneath shingles, shakes or other roofing materials, it can work its way to the roof deck and cause the roof structure to rot. Extra moisture encourages mildew and rot elsewhere in a house, including walls, ceilings, insulation and electrical systems.
- Wind: High winds can lift shingles' edges (or other roofing materials) and force water and debris underneath them. Extremely high winds can cause extensive damage.
- Snow and ice: Melting snow often refreezes at a roof's overhang where the surface is cooler, forming an ice dam. This blocks proper drainage into the gutter. Water backs up under the shingles (or other roofing materials) and seeps into the interior. During the early melt stages, gutters and downspouts can be the first to fill with ice and be damaged beyond repair or even torn off a house or building.
- Condensation: Condensation can result from the buildup of relatively warm, moisture-laden air. Moisture in a poorly ventilated attic promotes decay of wood sheathing and rafters, possibly destroying a roof structure. Sufficient attic ventilation can be achieved by installing larger or additional vents and will help alleviate problems because the attic air temperature will be closer to the outside air temperature.
- Moss and algae: Moss can grow on moist wood shingles and shakes. Once it grows, moss holds even more moisture to a roof system's surface, causing rot. In addition, moss roots also can work their way into a wood deck and structure. Algae also grows in damp, shaded areas on wood or asphalt shingle roof systems. Besides creating a black-green stain, algae can retain moisture, causing rot and deterioration. Trees and bushes should be trimmed away from homes and buildings to eliminate damp, shaded areas, and gutters should be kept clean to ensure good drainage.
- Trees and leaves: Tree branches touching a roof will scratch and gouge roofing materials when the branches are blown by the wind. Falling branches from overhanging trees can damage, or even puncture, shingles and other roofing materials. Leaves on a roof system's surface retain moisture and cause rot, and leaves in the gutters block drainage.
- Missing or torn shingles: The key to a roof system's effectiveness is complete protection. When shingles are missing or torn off, a roof structure and home or building interior are vulnerable to water damage and rot. The problem is likely to spread-nearby shingles also are ripped easily or blown away. Missing or torn shingles should be replaced as soon as possible.
- Shingle deterioration: When shingles are old and worn out, they curl, split and lose their waterproofing effectiveness. Weakened shingles easily are blown off, torn or lifted by wind gusts. The end result is structural rot and interior damage. A deteriorated roof system only gets worse with time-it should be replaced as soon as possible.
- Flashing deterioration: Many apparent roof leaks really are flashing leaks. Without good, tight flashings around chimneys, vents, skylights and wall/roof junctions, water can enter a home or building and cause damage to walls, ceilings, insulation and electrical systems. Flashings should be checked as part of a biannual roof inspection and gutter cleaning.
Buying a new roof system is an important investment. Before you spend your money, spend time learning how to evaluate roofing contractors. You should insist on working with a professional roofing contractor. NRCA wants to assist you in getting the kind of results you expect—a quality roof system at a fair price. All roofing contractors are not alike, and NRCA recommends that you prequalify roofing contractors to get the job done right the first time. The following guidelines will help you select a professional:
COMMONLY ASKED QUESTIONS
- Check for a permanent place of business, telephone number, tax identification number and, where applicable, a business license.
- Don't hesitate to ask a roofing contractor for proof of insurance. In fact, insist on seeing copies of his liability coverage and workers' compensation certificates. Make sure the coverages are in effect through the duration of the job. Many building and home owners have been dragged into litigation involving uninsured roofing contractors. Also, if a contractor is not properly insured, you may be liable for accidents that occur on your property.
- Check to see if the roofing contractor is properly licensed or bonded. Some states have specific licensing requirements, and others do not. Your state's Department of Professional Regulation or Licensing Board will have this information.
- Make sure the contractor is financially stable. A professional roofing contractor can provide current financial information about his company.
- Look for a company with a proven track record that offers client references and a list of completed projects. Call these clients to find out whether they were satisfied.
- Insist on a detailed, written proposal and examine it for complete descriptions of the work and spec ifications, including approximate starting and completion dates and payment procedures.
- Have the contractor list the roofing manufacturers with which his firm is a licensed or approved applicator. Most roof systems require special application expertise to achieve lasting quality.
- Have the contractor explain his project supervision and quality-control procedures. Request the name of the person who will be in charge of your project, how many workers will be required and estimated completion time.
- Check to see if the contractor is a member of any regional or national industry associations, such as NRCA. Being a member of industry associations demonstrates a commitment to professionalism.
- Call your local Better Business Bureau or Department of Professional Regulation to check for possible complaints filed against the contractor.
- Carefully read and understand any roofing warranties offered, and watch for provisions that would void it.
- Choose a company committed to worker safety and education. Ask the contractor what type of safety training he provides for his workers and what industry education programs they have attended. The best roofing contractor is only as good as the workers who install the roof system.
- Keep a healthy skepticism about the lowest bid. If it sounds too good to be true, it probably is. Many fly-by-night contractors' below-cost bids seem attractive, but these contractors often are uninsured and perform substandard work. Remember, price is only one of the criteria for selecting a roofing contractor. Professionalism, experience and quality workmanship also should weigh heavily in your decision.
Q: How can a home owner recognize when a roof system has problems?
A: All too often, roof system problems are discovered after leaking or other serious damage occurs. Periodic (twice-a-year) inspections often can uncover cracked, warped or missing shingles; loose seams and deteriorated flashings; excessive surface granules accumulating in the gutters or downspouts; and other visible signs of roof system problems. Indoors, look for cracked paint, discolored plasterboard and peeling wallpaper as signs of damaged roof areas.
Q: What are my options if I decide to reroof?
A: You have two basic options: You can choose a complete replacement of the roof system, involving a tear-off of your existing roof system, or re-cover the existing roof system, involving only the installation of a new roof system. If you've already had one re-cover installed on your original roof system, check with a professional roofing contractor. In many instances, building code requirements allow no more than one roof system re-cover before a complete replacement is necessary.
Q: My roof leaks. Do I need to have it replaced completely?
A: Not necessarily. Leaks can result from flashings that have come loose or a section of the roof system being damaged. A complete roof system failure, however, generally is irreversible and a result of improper installation or choice of materials or the roof system installation is inappropriate for the home or building.
Q: Can I do the work myself?
A: Most work should not be done yourself. Professional roofing contractors are trained to safely and efficiently repair or replace roof systems. You can damage your roof system by using improper roofing techniques and severely injure yourself by falling off or through the roof.
Maintenance performed by home and building owners should be confined to inspecting roof systems during the fall and spring to check for cracked or curling shingles and cleaning gutters filled with dead leaves and other debris. If you must inspect your roof system yourself, use a firmly braced or tied-off ladder equipped with rubber safety feet. Wear rubber-soled shoes and stay on the ladder (and off the roof system), if possible.
Q: How long can I expect my roof system to last?
A: Most new roof systems are designed to provide useful service for about 20 years. Some roof system types, such as slate, clay tile and certain metal (e.g., copper) systems, can last longer.
Actual roof system life span is determined by a number of factors, including local climatic and environmental conditions, proper building and roof system design, material quality and suitability, proper application and adequate roof maintenance.
Roofing product manufacturers offer a variety of warranties on their products. Take a close look at those warranties to see what responsibilities and financial obligations manufacturers will assume if their products fail to reach their expected lives.
Q: What will a new roof system cost?
A: The price of a new roof system varies widely, depending on such things as the materials selected, contractor doing the work, home or building, location of the home or building, local labor rates and time of year. To get a good idea of price for your roof system, get three or four proposals from reputable contractors in your area. Keep in mind that price is only one factor, and it must be balanced with the quality of the materials and workmanship.
For each roofing material, there are different grades and corresponding prices. There also are a variety of styles and shapes. You need to look at the full product range and make a choice based on your budget and needs.
Within the roofing profession, there are different levels of expertise and craftsmanship. Insist on a contractor who is committed to quality work.
Q: How can I determine my annual roofing cost?
A: When considering your roofing options, the following formula may help:
Total Cost (Materials and Labor) ÷ Life Expectancy of Roof System (in years) = Annual Roofing Cost
TERMS YOU SHOULD KNOW
Deck/sheathing: The surface, usually plywood or oriented strand board (OSB), to which roofing materials are applied.
Dormer: A small structure projecting from a sloped roof, usually with a window.
Drip edge: An L-shaped strip (usually metal) installed along roof edges to allow water run off to drip clear of the deck, eaves and siding.
Eave: The horizontal lower edge of a sloped roof.
Fascia: A flat board, band or face located at a cornice's outer edge.
Felt/underlayment: A sheet of asphalt-saturated material (often called tar paper) used as a secondary layer of protection for the roof deck.
Fire rating: System for classifying the fire resistances of various materials. Roofing materials are rated Class A, B or C, with Class A materials having the highest resistance to fire originating outside the structure.
Flashing: Pieces of metal used to prevent the seepage of water around any intersection or projection in a roof system, such as vent pipes, chimneys, valleys and joints at vertical walls.
Louvers: Slatted devices installed in a gable or soffit (the underside of eaves) to ventilate the space below a roof deck and equalize air temperature and moisture.
Oriented strand board (OSB): Roof deck panels (4 by 8 feet) made of narrow bits of wood, installed lengthwise and crosswise in layers, and held together with a resin glue. OSB often is used as a substitute for plywood sheets.
Penetrations: Vents, pipes, stacks, chimneys-anything that penetrates a roof deck.
Rafters: The supporting framing to which a roof deck is attached.
Rake: The inclined edge of a roof over a wall.
Ridge: The top edge of two intersecting sloping roof surfaces.
Sheathing: The boards or sheet materials that are fastened to rafters to cover a house or building.
Slope: Measured by rise in inches for each 12 inches of horizontal run: A roof with a 4-in-12 slope rises 4 inches for every foot of horizontal distance.
Square: The common measurement for roof area. One square is 100 square feet (10 by 10 feet).
Truss: Engineered components that supplement rafters in many newer homes and buildings. Trusses are designed for specific applications and cannot be cut or altered.
Valley: The angle formed at the intersection of two sloping roof surfaces.
Vapor retarder: A material designed to restrict the passage of water vapor through a roof system or wall.
SOURCES OF ADDITIONAL INFORMATION
American Society of Home Inspectors
932 Lee Street, Suite 101
Des Plaines, IL 60016
Asphalt Roofing Manufacturers Association
4041 Powder Mill Road, Suite 404
Calverton, MD 20705
Cedar Shake & Shingle Bureau
P.O. Box 1178
Sumas, WA 98295-1178
Metal Construction Association
104 S. Michigan Ave., Suite 1500
Chicago, IL 60603
National Association of Home Builders
1201 15th St. N.W.
Washington, D.C. 20005
National Association of the Remodeling Industry
4900 Seminary Road, Suite 320
Arlington, VA 22203
National Tile Roofing Manufacturers Association
P.O. Box 40337
Eugene, OR 97404-0049
Roofing Qualification Statement as suggested by NRCA is a form home and building owners should ask prospective roofing contractors to complete and submit with proposals. The form asks for information about contractors' companies, work in progress, references, finances and insurance.
The NRCA Asphalt Shingle Manual presents guidelines for asphalt shingle roofing. It addresses application techniques, construction details, general requirements and precautions.
The NRCA Steep Roofing Manual presents guidelines for steep-slope roofing, including asphalt shingles, wood shakes and shingles, slate, and clay and concrete tile. It addresses application techniques, construction details, general roofing requirements and precautions.
The NRCA Steep-Slope Roofing Materials Guide is a comprehensive, 230-page report about steep-slope products, including asphalt shingles, fiber-cement roof components, metal roof components, clay tile, concrete tile, slate and synthetic roof components. It contains detailed descriptions, comparative data, manufacturer-reported wind and fire ratings, and code approvals.
For a free NRCA catalog of publications and audiovisual programs or to purchase any of these publications, visit NRCA's publications and audiovisuals section or contact NRCA's Marketing Services Department at (800) 323-9545, (847) 299-9070 (outside the United States and Canada) or e-mail firstname.lastname@example.org.
(800) USA-ROOF is a service offered by NRCA to help home and building owners locate professional roofing contractors in specific geographic areas. Owners are sent, free of charge, a computerized list of NRCA-contractor members sorted by zip code, a listing of local and regional NRCA affiliate organizations, and information that describes common roof systems and general roofing terminology. To receive this information, home and building owners should call 1 (800) USA-ROOF. Please allow at least two weeks for delivery.
Lists of NRCA-contractor members in specific geographic areas, can be obtained from NRCA's Web site search for a member section. Contractors can be selected by state, area code or zip code.
10255 W. Higgins Road Suite 600, Rosemont, IL 60018 || 847.299.9070 || Fax 847.299.1183
324 Fourth Street N.E. Washington D.C., 20002 || 202.546.7584 || Fax 202.546.9289
Copyright© 1998 - 1999 National Roofing Contractors Association
Our thanks to the National Roofing Contractors Association for this article
Tell your friends about this page!