Posted by: JOhn Wright on February 01, 2005 at 21:02:48:
In Reply to: Re: water not getting into ice maker area Posted by: bryan korbel on January 30, 2005 at 22:53:09:
From the rear of cabinet, remove the 2 1/4" hex screws that secure the fill tube in place, Remove
the fill tube and inspect for ice blockage. Remove
the ice, soak in vinegar to clean , reinsert making sure the front of tube is placed inside icemaker funnel cup. Reinstall fill tube, make sure to reuse the foam seal. UB done! Ice Ice Baby