|
|
|
|
|
|
Posted by: bob hanna on April 16, 2000 at 07:53:41:
In Reply to: Replacing Vinyl Above Ground pool liner Posted by: Carmen Galand on April 14, 2000 at 22:40:17:
: Any suggestion so that there are no wrinkles when replacing a liner in an above ground pool?
yep,been there done that!!The new liner comes with very good instructions...main thing is to insure that your sand bed is good and smooth, then center the liner so that you can 'clothespin' the liner evenly all around the top edge of pool before starting to add water...remember that the new liner is designed to stretch..so you will gather a suffecient amount of liner at the top rail to allow it to be in the right place after pool is filled. This is especially important if you have a pool that has a 'deep' part taper up to a flat surface. Watch for wrinkles as they begin and work em out before they get started good.
good luck!!
Bob
| Subject: | |
